Infasecure CS8113 - Installing Using Vehicle Seatbelt

18
Installation
Infant Seat
Place the child restraint on the vehicle seat. Ensure
recline section is swung forward and the restraint is
fully reclined with the restraint directly in line with
anchorage point.
Make sure Top Tether strap is as in illustration
(Figures 1 and 2) i.e. positioned around restraint
back.
Step 1:
Step 2:
Installing Using Vehicle Seatbelts
Feed adult lap or lap/sash belt through the belt path
opening, ensure the seat belt is under the cover &
between the layer of foam and the plastic seat base.
Engage the buckle and tongue assembly (listen for
a “CLICK”). Check the buckle engagement with a
gentle pull.
Step 3:
IMPORTANT
!
Ensure that you use the
REARWARD-FACING BELT PATH
identied by the following label.
¶
REARWARD FACING
BELT PATH
Figure 2
Buckle
Assembly
Figure 1
Top Tether
Strap
Front
of Car
Recline Section
Lap Belt &
Sash Belt Passes
Through Here
Recline Section (Swung Forward)
& child restraint fully reclined.
Adjuster