Infasecure CS9013 - Replace Covers; Headrest; Apron; Seatbase

Replace Covers
Step 1:
Step 2:
Step 3:
Raise the headrest to highest position (refer Figure 1).
Slide the cover over the headrest
Clip the press studs located;
Underside of headrest
Behind headrest
Headrest
Step 1:
Step 2:
Slide the cover up and over the plastic apron (refer
Figure 2).
Note: Ensure the comfort pad is in front of
the plastic apron.
Clip the press studs location .
Apron
1
1
2
2
1
2
1
1
2
1
Figure 1
Figure 2
Figure 3
Seatbase
Step 1:
Step 2:
Step 3:
Slide the cover on to the seatbase (refer Figure 3).
Fold the Buckle ap forward and pass the buckle
through the cover.
Clip the press studs located;
each side inner
each side outer
26