Inficon Protec P3000XL

Protec P3000(XL)
Helium-Schnüffellecksuchgerät
Translation of the original operating manual
from software version
document no
4.17
kina26en1-19-(1902)
Catalog No
Protec P3000
Protec P3000
520-001
520-002
Protec P3000XL
Protec P3000XL
520-003
520-004
Protec P3000(RC)
Protec P3000(RC)
520-103
520-104
Protec P3000XL(RC)
Protec P3000XL(RC)
520-105
520-106
230 V
115 V
230 V
115 V
230 V
115 V
230 V
115 V
Protec P3000(XL)
Helium Sniffer Leak Detector

Inficon Protec P3000XL Specifications

General

Model	Protec P3000XL
Category	Controller
Power Supply	100-240 V AC, 50/60 Hz
Operating Temperature	0 to 50 °C
Response Time	<1 second
Alarm	Visual and audible
Protection Class	IP20
Communication Interface	RS-232
Detectable Gases	Refrigerants
Display	LCD
Operating Humidity	10 to 90% RH, non-condensing
Accuracy	±10%
Output Signals	Analog, digital

Summary

Protec P3000 Installation

Protec P3000 Setup and Mechanical Connections

Protec P3000 Electrical Connections

Instructions for electrical connections, including mains, RS232 interface, and I/O port.

How the Protec P3000 Works

Protec P3000 Functions and Subassemblies

Protec P3000 Displays and User Interfaces

Operation of the Protec P3000

Protec P3000 Start-Up and Basic Operation

Guide to starting up the Protec P3000 and using controls on the main and probe units.

Performing Measurements: Standard and IGuide Modes

Instructions for performing measurements in standard and guided I•Guide modes.

Protec P3000 Calibration and Self-Test

Procedures for internal, external calibration, and verifying calibration status.

Equipment Settings

Protec P3000 Menu and Service Settings

Protec P3000 Gas and Trigger Settings

How to select gas equivalents and set trigger values for leak detection.

Protec P3000 General Settings Configuration

Protec P3000 Interface and Data Management Settings

Protec P3000 History and Maintenance Log

Protec P3000 Messages

Protec P3000 Error and Warning Messages

List of possible error and warning messages, their reasons, and recommended solutions.

Equipment Connections

Protec P3000 IO Port Configuration

Details on configuring I/O ports for control inputs, outputs, and relay signals.

Protec P3000 RS232 Interface Setup

Maintenance

Protec P3000 Maintenance Schedule

Defines recommended maintenance tasks, intervals, and required tools for the Protec P3000.

Protec P3000 Filter Replacement Procedures

Protec P3000 Fuse and PRO-Check Reservoir Replacement