Inficon VGC502 - 4.5.3 Gauge Control

46 tina96e1-b (2016-12) VGC501_VGC502_VGC503.om
Display resolution of measured values.
Available for the following gauges:
 Pirani
(PSG)
 Pirani / Capacitance (PCG)
 Cold cathode
(PEG, MAG)
 Cold cathode / Pirani
(MPG)
 Hot ionization / Pirani
(BPG, HPG)
 Capacitance (CDG)
 Hot ionization / Pirani / Capacitance
(BCG)
Value
DIGITS I
DIGITS AUTO I  Automatic
*)
(factory setting)
DIGITS 1 I  e.g. 2E-1 or 500
DIGITS 2 I  e.g. 2.5E-1 or 520
DIGITS 3 I  e.g. 2.47E-1 or 523
DIGITS 4 I  e.g. 2.473E-1 or 523.7
*)
The mantissa is dependent on the connected gauge and the currently valid
pressure value.
With PSG and PCG gauges in the pressure range p<1.0E-4 mbar and activated
RNG-EXT (→  51) the display is reduced by one decimal digit.
SENSOR-CONTROL >I The sensor control group is used for displaying,
entering and editing parameters which define how the
connected gauges are activated/deactivated.
This group is available for the PEG/MAG gauges only.
S-ON I Gauge activation
S-OFF I Gauge deactivation
T-ON I ON threshold (VGC502/503 only)
T-OFF I OFF threshold
< I One level back
Display resolution
4.5.3 Gauge Control
Parameters in this group