2
EU DECLARATION OF CONFORMITY
This declaration is issued under the sole responsibility of the manufacturer INFICON. The object of the
declaration is to certify that this equipment, designed and manufactured by INFICON, is in conformity
with the relevant Community harmonization legislation. It has been constructed in accordance with good
engineering practice in safety matters in force in the Community and does not endanger the safety of per-
sons, domestic animals or property when properly installed and maintained and used in applications for
which it was made.
Equipment Description: Whisper
®
Ultrasonic Leak Detector
Model Number: 711-202-Gxx (Applicable to all Group numbers)
711-203-Gxx (Applicable to all Group numbers)
Applicable Directives: 2014/30/EU General EMC
2011/65/EU RoHS
Applicable Standards:
Safety: EN 61010-1:2010 Safety requirements for electrical equipment
for measurement, control, and laboratory use.
General requirements.
IEC 60825-1:2014 Safety of Laser Products - Part 1: Equipment
Classification and requirements.
Emissions: CISPR 11/EN 55011:2009 Emission standard for industrial, scientific,
(+A1:2010) and medical (ISM) radio RF equipment
(Class B)
Immunity: EN 61326-1:2013 Edition 2.0 (EMC - Measurement, Control &
Laboratory Equipment)
Immunity per Table A.1 - Portable Test and
Measurement Equipment
RoHS: EN 50581:2013 Technical documentation for the assessment
of electrical and electronic products with
respect to the restriction of hazardous
substances
CE Implementation Date: April 20, 2016
Manufacturer Representative EU Authorized Representative
Brian King INFICON GmbH
Business Line Manager - Service Tools 50968 Köln, Bonner Str. 498
Two Technology Place
East Syracuse, NY USA 13057
INFICON
ANY QUESTIONS RELATIVE TO THIS DECLARATION OR TO THE SAFETY OF INFICON'S PRODUCTS
SHOULD BE DIRECTED, IN WRITING, TO THE AUTHORIZED REPRESENTATIVE AT THE ABOVE ADDRESS.
To Next Page
Loading...
Need help?
General
