To Next PageTo Next Page
Need help?Do you have a question about the Infineon TriBoard TC3X7 and is the answer not in the manual?
General| Manufacturer | Infineon |
|---|---|
| Model | TriBoard TC3X7 |
| Category | Motherboard |
| Core Architecture | TriCore |
| Target Application | Automotive, Industrial |
| On-board Debugger | Yes |
| Processor | AURIX TC3X7 |
| Interfaces | CAN, LIN, FlexRay, Ethernet |
| Debug Interface | JTAG |
| Operating Temperature | -40°C to 125°C |
| Operating Voltage | 5V |
| Power Supply | External power supply required |
Defines the manual's scope, purpose, and hardware variants covered.
Identifies the target audience for this technical manual.
Lists key hardware features of the TriBoard TC3X7, including controller and peripherals.
Details the variety of connectors available on the TC3X7 TriBoard.
Highlights major components like power supply, LEDs, and transceivers.
Visual representation of the TriBoard's main functional blocks and connections.
Illustrates the physical layout and placement of components on the board.
Explains the power supply generation, voltages, and input requirements.
Describes the failsafe state of the TLF35584 and how to manage it.
Details the function and location of the LEDs on the board.
Information on the crystal oscillator and the USB connector's functionality.
Guides on serial communication via USB and using the miniWiggler JDS debugger.
Details on FlexRay, MultiCAN, and LIN transceiver connections and usage.
Information on Ethernet interface and optional HSCT connection.
Covers toggle LEDs, buttons, and other peripheral signals.
Details on OCDS1, DAP, DAPE, and high-speed debug connections.
Information on optional AGBT, ETK, and EmW Power connectors.
Explains DIP switches for selecting boot mode and pad states.
Details general optional resistors and their assembly.
Lists resistors used for configuring various peripheral interfaces.
Defines all power-related signals available on the board.
Lists and describes the reset signals for the board.
Details configuration, clock, and debug interface signals.
Lists and describes various peripheral interface signals.
Identifies port pins used only internally on the board.
Provides detailed pinout information for the TC3X7 connector.
Pinout diagrams for Power, USB, FlexRay, and CAN connectors.
Pinout diagrams for LIN, HSCT, and Ethernet connectors.
Pinout details for OCDS1 and DAP debug connectors.
Pinout information for optional ETK and EmW Power connectors.
Pinout details for the optional AGBT connector.
Lists any known issues or problems with the TriBoard hardware.
Provides the detailed circuit schematics for the TriBoard.
Shows the placement of components on the top layer of the PCB.
Shows the placement of components on the bottom layer of the PCB.
Provides mechanical dimensions of the board in millimeters.
Provides mechanical dimensions of the board in mils.
