Infineon XMC4700 - Page 19

19 of 31
2019-12-02
Using Infineon’s radar baseboard XMC4700 and BGT24LTR11 radar
shield with Arduino
Set-up guide
Software set-up
4. Attach the BGT24LTR11 radar shield to the radar baseboard XMC4700 via the SAMTEC connectors (Figure
20).
Figure 20 Attach the BGT24LTR11 radar shield to the radar baseboard XMC4700
5. Connect the radar baseboard XMC4700 to the PC via a USB cable onto the “Debug” USB port (Figure 21).
Figure 21 Connect USB cable to debug port