3. PRINTER FUNCTIONS3. PRINTER FUNCTIONS
KPM210/216
233-
celled, the corresponding pattern for the internal character is
printed.
• This command deletes the pattern defined for the specified
character code in the font selected by ESC !.
• If the user-defined character has not been defined for the
specified character code, the printer ignores this command.
[Default]
[Reference] ESC &, ESC %
[Example]
@CSE@CSE
@CSE
@CSE@CSE
[Name] Initialize printer
[Format] ASCII ESC @
Hex 1B 40
Decimal 27 64
[Description] Clears the data in the print buffer and resets the printer mode
to that in effect when power was turned on.
[Notes] • The data in the receiver buffer is not cleared.
• The macro definitions are not cleared.
[Default]
[Reference]
[Example]
LUN]kn...1n[DCSELUN]kn...1n[DCSE
LUN]kn...1n[DCSE
LUN]kn...1n[DCSELUN]kn...1n[DCSE
[Name] Set horizontal tab positions
[Format] ASCII ESC D n1...nk NUL
Hex 1B 44 n1...nk 00
Decimal 27 68 n1...nk 0
[Range] 1 ≤ n ≤ 255
0 ≤ k ≤ 32
[Description] Sets horizontal tab positions
• n specifies the column number for setting a horizontal tab
position calculated from the beginning of the line.
• k indicates the total number of horizontal tab positions to be
set.
www.ipcprint.com
To Next Page
Loading...