Why is my Infiniton CMPTRAL-BT90 Ventilation Hood not sucking properly?
If your Infiniton Ventilation Hood isn't sucking properly, it could be due to: * The distance between the hood and the cooker top being too large. Readjust the distance. * Too much ventilation from open doors or windows. Choose a new place to install the appliance or close some doors / windows.
What to do if my Infiniton Ventilation Hood is vibrating?
If your Infiniton Ventilation Hood is vibrating, it could be due to several reasons: * A damaged blade. Replace the blade. * The motor not being tightly fastened. Fasten the motor tightly. * The cooker hood not being tightly fixed. Fix the cooker hood tightly.
Why the motor of my Infiniton Ventilation Hood is not working, but the light is on?
If the light is on but the motor of your Infiniton Ventilation Hood isn't working, it could be due to: * Blocked blades. * A damaged capacitor. Replace the capacitor. * A damaged motor. Replace the motor. * Cut off or disconnected internal wiring of the motor, which may produce an unpleasant smell. Replace the motor.
What to do if both light and motor of my Infiniton CMPTRAL-BT90 do not work?
If both the light and motor of your Infiniton Ventilation Hood aren't working, possible causes include: * A damaged light. Replace the lights. * A loose power cord. Connect the wires as per the electric diagram.
How to fix oil leakage from Infiniton CMPTRAL-BT90 Ventilation Hood?
If your Infiniton Ventilation Hood is leaking oil, it may be due to: * The outlet and air ventilation entrance not being tightly sealed. Take down the outlet and seal with glue. * Leakage from the connection of the U-shaped section and cover. Take the U-shaped section down and seal with soap or paint.
Why is my Infiniton CMPTRAL-BT90 Ventilation Hood inclining?
If your Infiniton Ventilation Hood is inclining, it could be because: * The fixing screws aren't tight enough. Tighten the fixing screw and make it horizontal. * The hanging screws aren't tight enough. Tighten the hanging screw and make it horizontal.
General| Type | Wall-mounted |
|---|---|
| Width | 90 cm |
| Material | Stainless Steel |
| Control Type | Push Button |
| Number of Fan Speeds | 3 |
| Noise Level | 65 dB |
| Lighting | LED |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
To Next Page