What to do if the light and motor don't work on my Infiniton CMPTRAL-W69 Ventilation Hood?
If the lights and the motor aren't working on your Infiniton Ventilation Hood, check the house fuses and reset or replace them if necessary. Also, ensure the power cord is properly connected to the power outlet and that the power outlet is switched on.
Why is the light on but the motor not working on my Infiniton CMPTRAL-W69?
If your Infiniton Ventilation Hood lights are on but the motor isn't working, first make sure the fan switch is set to an active position. If the switch is already on, this issue requires contacting a service center.
What to do if my Infiniton CMPTRAL-W69 is leaking oil?
If your Infiniton Ventilation Hood is leaking oil, remove the one-way valve and seal it tightly with sealant. Also, check the connection between the chimney and cover for leaks and seal if necessary.
How to fix lights not working on Infiniton CMPTRAL-W69 Ventilation Hood?
If the lights on your Infiniton Ventilation Hood are not working, replace the globes according to the instructions.
What to do if my Infiniton CMPTRAL-W69 Ventilation Hood inclines?
If your Infiniton Ventilation Hood is inclining, tighten the hanging screw to make it horizontal.
How to improve suction on Infiniton Ventilation Hood?
To resolve insufficient suction in your Infiniton Ventilation Hood, adjust the distance between the hood and the gas top to ensure it is correctly positioned.
General| Brand | Infiniton |
|---|---|
| Model | CMPTRAL-W69 |
| Category | Ventilation Hood |
| Language | English |
To Next Page