EasyManua.ls Logo

Infiniton CMPTRAL-WT90 - User Manual

Infiniton CMPTRAL-WT90
25 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
modelo:
Manual del usuario
CMPTRAL-BT90
CMPTRAL-WT90

Questions and Answers

  • T
    Travis ClarkAug 9, 2025
    Why is my Infiniton CMPTRAL-WT90 Ventilation Hood not sucking properly?
    • L
      Lisa PhillipsAug 9, 2025
      If your Infiniton Ventilation Hood isn't sucking properly, it could be due to: * The distance between the hood and the cooker top being too large. Readjust the distance. * Too much ventilation from open doors or windows. Choose a new place to install the appliance or close some doors / windows.
  • C
    Cheryl SmithAug 14, 2025
    What to do if my Infiniton CMPTRAL-WT90 is vibrating?
    • H
      Heather BarronAug 14, 2025
      If your Infiniton Ventilation Hood is vibrating, it could be due to several reasons: * A damaged blade. Replace the blade. * The motor not being tightly fastened. Fasten the motor tightly. * The cooker hood not being tightly fixed. Fix the cooker hood tightly.
  • J
    Janice BarrAug 18, 2025
    Why the motor of my Infiniton Ventilation Hood is not working, but the light is on?
    • C
      Cindy MedinaAug 19, 2025
      If the light is on but the motor of your Infiniton Ventilation Hood isn't working, it could be due to: * Blocked blades. * A damaged capacitor. Replace the capacitor. * A damaged motor. Replace the motor. * Cut off or disconnected internal wiring of the motor, which may produce an unpleasant smell. Replace the motor.
  • L
    Lauren SingletonAug 25, 2025
    What to do if both light and motor of my Infiniton CMPTRAL-WT90 do not work?
    • D
      David YoungAug 25, 2025
      If both the light and motor of your Infiniton Ventilation Hood aren't working, possible causes include: * A damaged light. Replace the lights. * A loose power cord. Connect the wires as per the electric diagram.
  • J
    josephbrownAug 28, 2025
    How to fix oil leakage from Infiniton CMPTRAL-WT90 Ventilation Hood?
    • J
      Jennifer CampbellAug 28, 2025
      If your Infiniton Ventilation Hood is leaking oil, it may be due to: * The outlet and air ventilation entrance not being tightly sealed. Take down the outlet and seal with glue. * Leakage from the connection of the U-shaped section and cover. Take the U-shaped section down and seal with soap or paint.
  • A
    Andrea ParksSep 3, 2025
    Why is my Infiniton CMPTRAL-WT90 inclining?
    • A
      Andrew McneilSep 3, 2025
      If your Infiniton Ventilation Hood is inclining, it could be because: * The fixing screws aren't tight enough. Tighten the fixing screw and make it horizontal. * The hanging screws aren't tight enough. Tighten the hanging screw and make it horizontal.

Infiniton CMPTRAL-WT90 Specifications

General IconGeneral
TypeWall-mounted
ColourWhite
Width90 cm
Number of motors1
Number of speeds3
Lighting typeLED

Related product manuals