How to fix lights not working on Infiniton CMPG-527?
If the lights aren't working on your Infiniton Ventilation Hood, the issue might be with the globes. Replace the globes following the instructions.
Why Infiniton Ventilation Hood has insufficient suction?
If your Infiniton Ventilation Hood isn't providing enough suction, it might be too far from the gas top. Adjust the hood to the correct distance.
What to do if light is on but motor does not work on Infiniton Ventilation Hood?
If the light is on but the motor isn't working on your Infiniton Ventilation Hood, the fan switch might be turned off. Try selecting a fan switch position.
How to fix oil leakage from Infiniton CMPG-527?
If you notice oil leaking from your Infiniton Ventilation Hood, it could be due to a loose one-way valve or chimney connection. To resolve this: * Take down the one-way valve and seal it with sealant. * Take the chimney down and seal it properly.
What to do if light and motor do not work on Infiniton CMPG-527?
If your Infiniton Ventilation Hood's light and motor aren't working, check your house fuses and make sure the power cord is properly connected. * Reset or replace any blown fuses. * Ensure the power cord is securely fitted into the power outlet.
Why the Infiniton Ventilation Hood inclines?
If your Infiniton Ventilation Hood is inclining, the fixing screw might not be tight enough. Tighten the hanging screw to make the hood horizontal.
General| Type | Wall-mounted |
|---|---|
| Colour | Stainless steel |
| Width | 60 cm |
| Number of motors | 1 |
| Number of speeds | 3 |
| Lighting | LED |
| Grease filter type | Aluminum |
To Next Page