Why is my Infiniton Ventilation Hood vibrating?
If your Infiniton Ventilation Hood is vibrating, it could be due to several reasons: * A damaged blade. In this case, replace the blade. * The motor is not tightly fastened. Fasten the motor tightly. * The cooker hood itself is not tightly fixed. Ensure it is securely mounted.
What to do if my Infiniton Ventilation Hood has insufficient suction?
If your Infiniton Ventilation Hood isn't sucking up enough air, it might be because the distance between the hood and the cooker top is too large. Try readjusting the distance. Also, too much ventilation from open doors or windows can affect suction. Consider choosing a new installation location or closing some doors/windows.
What to do if my Infiniton CMPT-CLR92S is leaking oil?
If you notice oil leaking from your Infiniton Ventilation Hood, it's likely that the outlet and air ventilation entrance are not tightly sealed. To fix this, take down the outlet and seal it with glue to ensure a tight seal.
What to do if my Infiniton CMPT-CLR92S Ventilation Hood machine inclines?
If your Infiniton Ventilation Hood is inclining, check the fixing and hanging screws. If the fixing screws are not tight enough, tighten them and make sure the hood is horizontal. If the hanging screws are not tight enough, tighten them as well to ensure the hood is level.
What to do if light is on but motor does not work in Infiniton CMPT-CLR92S?
If the light is on but the motor isn't working in your Infiniton Ventilation Hood, there could be a few reasons: * The blades might be blocked, so check the blades. * The capacitor could be damaged, requiring a replacement. * The motor itself may be damaged and need replacing. * The internal wiring of the motor might be cut off or disconnected; in this case, replace the motor. Note that an unpleasant smell may be produced.
General| Brand | Infiniton |
|---|---|
| Model | CMPT-CLR92S |
| Category | Ventilation Hood |
| Language | English |
To Next Page