EasyManua.ls Logo

Infiniton CMPT-ISH99X - User Manual

Infiniton CMPT-ISH99X
44 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
2 3 4
5 6 7 8
9 10 11
modelo:
Manual del usuario
CMPT-ISH99X
CMPT-ISH98LR
CMPT-ISH97WG

Questions and Answers

  • B
    Brooke WeissAug 10, 2025
    Why is my Infiniton Ventilation Hood vibrating?
    • J
      James CollinsAug 11, 2025
      If your Infiniton Ventilation Hood is vibrating, it could be due to several reasons: * A damaged blade. In this case, replace the blade. * The motor is not tightly fastened. Fasten the motor tightly. * The cooker hood itself is not tightly fixed. Ensure it is securely mounted.
  • M
    Miranda RodriguezAug 15, 2025
    What to do if my Infiniton CMPT-ISH99X has insufficient suction?
    • D
      dschmidtAug 16, 2025
      If your Infiniton Ventilation Hood isn't sucking up enough air, it might be because the distance between the hood and the cooker top is too large. Try readjusting the distance. Also, too much ventilation from open doors or windows can affect suction. Consider choosing a new installation location or closing some doors/windows.
  • H
    Holly FrankAug 22, 2025
    What to do if my Infiniton Ventilation Hood is leaking oil?
    • M
      monicaalvaradoAug 22, 2025
      If you notice oil leaking from your Infiniton Ventilation Hood, it's likely that the outlet and air ventilation entrance are not tightly sealed. To fix this, take down the outlet and seal it with glue to ensure a tight seal.
  • M
    Michelle KlineAug 28, 2025
    What to do if my Infiniton Ventilation Hood machine inclines?
    • M
      melissahaleyAug 29, 2025
      If your Infiniton Ventilation Hood is inclining, check the fixing and hanging screws. If the fixing screws are not tight enough, tighten them and make sure the hood is horizontal. If the hanging screws are not tight enough, tighten them as well to ensure the hood is level.
  • G
    gonzalesalexandriaSep 3, 2025
    What to do if light is on but motor does not work in Infiniton CMPT-ISH99X Ventilation Hood?
    • S
      Sarah Johnson MDSep 3, 2025
      If the light is on but the motor isn't working in your Infiniton Ventilation Hood, there could be a few reasons: * The blades might be blocked, so check the blades. * The capacitor could be damaged, requiring a replacement. * The motor itself may be damaged and need replacing. * The internal wiring of the motor might be cut off or disconnected; in this case, replace the motor. Note that an unpleasant smell may be produced.

Infiniton CMPT-ISH99X Specifications

General IconGeneral
TypeWall-mounted
Number of speeds3
Lighting typeLED
Number of bulbs2
Grease filter typeAluminum
Width90 cm
Energy efficiency classA

Related product manuals