What to do if my Infiniton Ventilation Hood is vibrating?
If your Infiniton Ventilation Hood is vibrating, it could be due to several reasons: * A damaged blade may cause vibration, consider replacing it. * The motor might not be tightly fastened; ensure it is properly secured. * The cooker hood itself might not be tightly fixed, make sure to fix it tightly.
Why is my Infiniton Ventilation Hood light on, but the motor doesn't work?
If the light is on but the motor of your Infiniton Ventilation Hood isn't working, here are a few potential causes: * The blades could be blocked. * The capacitor might be damaged, in which case you should replace it. * The motor itself could be damaged, requiring replacement. * The internal wiring of the motor might be cut off or disconnected, which may also produce an unpleasant smell. Replace the motor.
What to do if my Infiniton CMPTRAL-NG61 has insufficient suction?
If your Infiniton Ventilation Hood has insufficient suction, it could be because: the distance between the hood and the cooker top is too large, so you should readjust the distance. Also, too much ventilation from open doors or windows can cause this issue. In this case, choose a new place to install the appliance or close some doors/windows.
Why is my Infiniton CMPTRAL-NG61 leaking oil?
If your Infiniton Ventilation Hood is leaking oil, it might be because the outlet and air ventilation entrance are not tightly sealed. To fix this, take down the outlet and seal it with glue. Alternatively, there could be leakage from the connection of the U-shaped section and cover. In this case, take the U-shaped section down and seal it with soap or paint.
How to fix an inclining Infiniton CMPTRAL-NG61?
If your Infiniton Ventilation Hood is inclining, it's likely because the fixing screws or the hanging screws are not tight enough. You should tighten the fixing screw or tighten the hanging screw and make it horizontal.
General| Brand | Infiniton |
|---|---|
| Model | CMPTRAL-NG61 |
| Category | Ventilation Hood |
| Language | English |
To Next Page
