What to do if the lights are not working on my Infiniton CMPTRAL-N68 Ventilation Hood?
If the lights on your Infiniton Ventilation Hood aren't working, the most likely cause is broken or faulty globes. Replace the globes following the instructions provided.
What to do if my Infiniton Ventilation Hood light is on, but the motor doesn't work?
If the light is on but the motor of your Infiniton Ventilation Hood isn't working, it could be due to several reasons. First, check if the fan switch is turned off and select a fan switch position. If the issue persists, it may be due to a fan switch or motor failure.
Why is my Infiniton Ventilation Hood leaking oil?
Oil leakage from your Infiniton Ventilation Hood can occur if the one-way valve and the outlet aren't tightly sealed. Remove the one-way valve and seal it with sealant. Alternatively, leakage might be from the connection of the chimney and cover, in which case you should take the chimney down and seal it.
What to do if my Infiniton CMPTRAL-N68 light and motor do not work?
If neither the light nor the motor of your Infiniton Ventilation Hood are working, check your house fuses and reset or replace them if they are blown. Also, ensure the power cord is properly fitted to the power outlet and that the outlet is switched on.
General| Brand | Infiniton |
|---|---|
| Model | CMPTRAL-N68 |
| Category | Ventilation Hood |
| Language | English |
To Next Page