Caution:
Every auto program has lots of massage action on shoulder. The chair
conducts body shape sensing on the initiation of auto program (or after
electric cylinder position is adjusted), so the user has to sit well on the
chair at this moment until body shape sensing finishes. (i.e. shoulder
adjustment on VFD display stops flashing).
To better adapt to the environment, the controller of this chair has dynamic
sampling. Within 5 seconds after the chair powers on, please don't use hand
or other metallic substance to touch controller display; otherwise it will
affect its button sensitivity.
7
14
PREPARATION BEFORE USING
Coupling shaft
Step 3 Installation of leg massage shelf
Insert the leg connection wire plug to its jack.
Connect air tube from the leg massage shelf with its port on the seat
shelf.
Aim the coupling shaft port on the leg massage shelf to the coupling
shaft on the seat and fasten them with one screw each side.
Paste the folding PU cover on the leg massage shelf with linking tape
on the cloth of the seat.
Air tube port
Connection wire
plug
Air tube
Connection wire
Screw
Coupling shaft
Press this key to turn on/off rolling massage function on sole
When the indicator light is off, press this key, the light will turn to flash
status, then interval rolling massage on sole is started and press twice,
the indicator light will be constantly on, then continuous rolling
massage on sole is started, press it the third time, rolling massage on
sole will be turned off. When the indicator is flashing or constantly on,
the Product is under rolling massage on sole
Remark: In automatic program, the air bag and roller is linked.
When the indicator light is constantly on, press this key to choose
strength among weak, medium and strong.
When the indicator light is off, this key is not operable.
Arms & shoulders, upper body, legs & feet
When massage function is under manual mode, if the indicator light is off,
press this key to open turn on the corresponding function, then the indicator
light will be on.
When the indicator light is off, if massage function is under working,
press this key to switch to manual mode.
When the indicator light is on, press this key to circularly choose
kneading, pummel, kneading $knocking, knocking, shiatsu and
rhythm massage.
When the massage functions are under manual mode, the indicator
light is constantly on, this key is operable, press it to circularly choose
6 different speeds.
When the indicator light is off, this key is not operable.
When the massage functions are under manual mode, the indicator light
is constantly on, this key is operable, press it to circularly choose narrow,
medium and wide, and width of the crank arm correspondingly change.
When the indicator light is off, this key is not operable.
When the massage functions are under manual mode, the indicator
light is constantly on, this key is operable, press it to circularly choose
full, partial and point, and the back massage mechanism
correspondingly conduct full, partial and point mode massage.
When the indicator light is off, this key is not operable
ARMS & SHOULDERSARMS & SHOULDERS
UPPER BODYUPPER BODY
LEGS & FEETLEGS & FEET
When the indicator light is constantly on, press this key
to stop corresponding airbag massage function.
NAME AND FUNCTION OF EACH COMPONENT
To Next Page
Loading...
