InFocus IN2112 User Manual

16
Problem Solution Result
No computer image, just the words “Signal out of
range”
Press the Auto Image button on the keypad or remote. To
adjust computer refresh rate, go to Control Panel > Display >
Settings > Advanced > Adapter (location varies by operating
system).
You may also need to set a different resolution on your
computer, as shown in the following problem, “image fuzzy or
cropped”
Computer image projected
Only my laptop’s background appears, not the
Desktop icons
Windows - Disable “Extend my Windows Desktop” in Control
Panel > Display > Settings > Display 2 (location varies by
operating system)
Background and Desktop projected
A
Signal out of
the range
A
Uncheck this
option, then
click Apply
A

InFocus IN2112 Specifications

General

Projection technology	DLP
Contrast ratio (typical)	2100:1
Projector native resolution	SVGA (800x600)
Aspect ratio	4:3, 5:4, 16:9
Power supply	288 W
RS-232 ports	1
Dimensions (WxDxH)	116.8 x 241.3 x 315 mm
Power requirements	100 - 240 V 50 - 60 Hz
Lamp power	185 W
Light source type	Lamp
Service life of light source	3000 h
Service life of light source (economic mode)	4000 h
RMS rated power	10 W
Number of built-in speakers	2
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Product type	Standard throw projector

Weight and Dimensions

Weight	3180 g