How to troubleshoot no power on InFocus Conference System?
First, check that the power cord is securely connected to both the power outlet and the InFocus Conference System monitor. Next, ensure the power switch is turned ON and that the Power button on the remote or keypad is activated; the front LED should be green. Finally, test the power outlet by plugging in another electrical device to confirm it's supplying the correct voltage.
What to do if there is no sound on InFocus Conference System?
If you're not getting any sound from your InFocus Conference System, there are several things to check: * If using the supplied speakers, ensure they are properly connected and the speaker's power switch is on. * If using internal speakers, verify the Audio menu Speaker setting is set to Internal. * For external sources like component, confirm the audio cable is correctly installed between the device and the monitor. * Check that the volume is turned up and not muted using the remote. * If using Mondopad software, make sure the volume isn't muted in the application (check the speaker icon). * If playing a video, ensure playback isn't paused and the video's audio isn't muted. * Remember that an HDMI® 1.3 (or higher) source and device are needed for audio via HDMI.
Why is the InFocus Conference System remote not working?
If the remote for your InFocus Conference System isn't working, start by ensuring the batteries are correctly installed and not dead. Then, check that the remote is turned on (the button is usually on the bottom). Make sure you're pointing the remote at the table within a 26-foot range (8m) and 30 degrees (horizontally/vertically) of the sensor. Lastly, verify that the IR Control setting in the Advanced Option OSD menu is set to Normal.
How to fix InFocus Conference System keypad or mouse when not working?
If your keypad and/or mouse aren't working with the InFocus Conference System, first ensure the batteries are correctly installed and not dead. Then, press the Connect button on the bottom of the keypad. Verify the USB adapter is properly installed into the monitor's USB port. Finally, check that the Keyboard Control setting in the Advanced Option OSD menu is set to Unlock.
How to fix no image from external source on InFocus Conference System?
To troubleshoot a 'no image from external source' issue on your InFocus Conference System, first verify that the connections between the source and the monitor are correctly made. Next, ensure that the cables are in good condition. Finally, confirm that the correct input source is selected and that the input signal is compatible with the monitor.
What to do if InFocus Conference System monitor shuts down suddenly?
If your InFocus Conference System monitor is shutting down suddenly, first ensure that a source is active. Next, check if the monitor may have overheated and remove any objects blocking the vents. Lastly, review the Windows power settings of the monitor.
Why is InFocus Conference System touchpad not functioning consistently?
If the touchpad functions on your InFocus Conference System are not working consistently, try the following: * Remove any objects placed on the lip of the monitor or within 2 inches of the touchpad screen. * Disable the PiP (Picture-in-Picture) feature, as the monitor works best when the Mondopad software is the main image displayed. * Power the device off and back on after a few seconds. Rebooting the device can help the touchpad resynchronize.
How to adjust colors on InFocus Conference System monitor?
If the colors on your InFocus Conference System monitor don't look right, start by adjusting the color settings in the Picture menu. If that doesn't work, try resetting the picture settings. Also, verify that the connections between the source and the monitor are correctly made and that the cables are in good condition.
How to eliminate audio noise on InFocus Conference System?
If you're experiencing audio noise with your InFocus Conference System, and using external speakers, verify that the Audio menu Speaker setting is set to External. Also, noise can occur when infrared communication equipment is nearby. Move the infrared communication equipment away from the monitor to eliminate the noise.
Why is there no touchpad activity with external computer on InFocus Conference System?
If you're experiencing no touchpad activity with an external computer connected to your InFocus Conference System, first verify that the USB B to USB type A cable is correctly plugged from the laptop into the monitor. Also, confirm that the laptop’s operating system is Windows® 7 or 8, as the monitor touchpad does not support other operating systems.
General| Brand | InFocus |
|---|---|
| Model | INF6521 |
| Category | Conference System |
| Language | English |
To Next Page
