Page 30
LED Indicators
FRONT LED
(near IR sensor)
PC LED
(back of the monitor)
SOLUTION
Red Off • The monitor is powered off.
Red Blinking Green • The monitor is in standby mode. Press the Power button on the
remote or keypad.
Green Green • The monitor is powered on.
Off Off • The system does not have power. 1) Verify the power cord is
properly connected to the power outlet and to the monitor; 2)
Verify that the power switch on the back of the unit is turned on; 3)
Plug another electrical device to the power outlet to verify that the
outlet is supplying the proper voltage.
For additional troubleshooting support, please contact:
InFocus Corporation - Technical Support
6am-5pm PST
877-388-8385
www.infocus.com/support
To Next Page
Loading...
