16
Using the Projector
The projector is equipped with a self-locking, quick-release foot
and a leveling foot.
To raise the projector:
1 Raise the projector to the height you want, then press and
hold the foot release button. Release the button to lock the foot
into position (Figure 11).
2 If necessary, manually rotate the leveling foot to adjust the
angle of the projected image.
FIGURE 11
Adjusting the height of the projector
foot release button
leveling foot
LP70.book Page 16 Friday, February 13, 2004 7:39 AM
To Next Page
Loading...
Need help?
General
