22
Using the Projector
Keystone
This option helps to keep the image square as the angle of projec-
tion is changed. Use this feature to adjust the image vertically
and make a squarer image. See page 19 for details on keystone
adjustments.
1 Press the down button to highlight Keystone, then press
Select. Use the arrows to adjust the keystone setting from -63
to +64 in the slider bar. Press
Select to accept your changes.
Setup
See the following pages for details on this menu.
Reset
This re-synchronizes the projector to the active computer or
video source.
About
This read-only menu provides information about the source, such
as resolution and horizontal and vertical frequencies.
LP70.book Page 22 Friday, February 13, 2004 7:39 AM
To Next Page
Loading...
Need help?
General
