36
Maintenance & Troubleshooting
Problem: Lamp shuts off
•A minor power surge may cause the lamp to shut off. Turn off
the projector, wait at least a minute, then turn it back on.
•Make sure the vents on the projector are not blocked.
The most current troubleshooting information can be found in
the Service and Support section of our website at
http://www.infocus.com/service. You’ll also find a Technical
Library, FAQs, and support contacts including a technical sup-
port e-mail form.
LP70.book Page 36 Friday, February 13, 2004 7:39 AM
To Next Page
Loading...
Need help?
General
