12
You can use the procedures in this section to restore all of the settings on a particular main
menu or all of the settings on the setup menu to their initial factory defaults.
To restore all settings on a particular main menu to their initial factory
defaults
1
Press the [MENU] key to display the setup menu.
2
Use the [T] and [S] keys to select the main menu whose settings you want to
restore to their initial factory defaults.
z You can select Image Adjustment, Screen Settings, Input Settings, Option Settings 1, or
Option Settings 2.
3
Press the [ENTER] key.
4
Use the [T] key to select “Restore Menu Defaults”.
5
Press the [ENTER] key.
z This will display a confirmation screen like the screen shown below.
6
Use the [S] key to select “Yes”.
7
To restore the settings of the main menu to their initial defaults, press the
[ENTER] key.
z To exit the operation without doing anything, press [ESC] instead of [ENTER].
8
After you are finished, press the [MENU] key to exit the setup menu.
z The language setting and the password are not returned to their initial factory defaults
if you select Option Settings 1 in step 3.
z For details about how the above procedure initializes settings, see the explanations of
the settings under “Setup Menu Contents” on page 13.
Restoring Projector Settings to Their Initial Factory
Defaults
To Next Page
Loading...
Need help?
General
