62
Testing Your Blood - Case of activated User Activity option and User
ID option
Step 4-1
If you selected to use the User Activity option during set up,
press up and down button to select the activity that correlates with
your result (refer to p. 48), then press
.
If you do not select to use user activity option during set up,
press
to continue to step 4-2.
Step 4-2
If you selected to use the User ID option during setup, press
▲
and
▼
button to select the correct User ID, then press
.
Caution
1. If you did not activate the User Activity option and/or the User ID option, Step 4-1 and/or
Step 4-2 procedures are not conducted.
2. Although User Activity option and/or User ID option are activated, if you pull the test strip
out right after the test, you can not move onto step 4, The test result is stored, not under
a specific User ID and only displayed after deactivating the User Id option.
3. Please refer to page 51, if you want to set the User Activity option and User ID option.
Testing Procedure
To Next Page
Loading...
