To Next PageTo Next Page
Need help?Do you have a question about the Infopia GlucoLab and is the answer not in the manual?
General| Blood Sample Size | 0.5 μL |
|---|---|
| Measuring Time | 5 seconds |
| Power Source | 2 x AAA batteries |
| Operating Humidity | 10 - 90% RH |
| Battery | 2 x AAA batteries |
| Measuring Range | 20-600 mg/dL |
| Operating Temperature | 10°C to 40°C |
| HCT Range | 30% to 55% |
| Sample Type | Capillary whole blood |
| Operating Conditions | 10°C to 40°C, 10% to 90% RH |
Covers intended use, safety precautions, and advice to consult healthcare professionals.
Guides the user through setting up the meter's date, time, and temperature units.
Details the automatic code recognition feature of the GLUCOLAB™ meter.
Emphasizes correct test unit selection and date/time accuracy for reliable results.
Provides detailed steps for using the lancing device and safely discarding used lancets.
Guides on inserting the test strip, meter power-on, and auto-coding recognition.
Explains how to apply the blood sample to the test strip and required volume.
Details how results are displayed, counted down, and should be recorded.
Covers handling high/low result messages and safe disposal of used test strips and lancets.
Provides step-by-step instructions for lancing and applying blood from alternate sites.
Covers battery replacement, checking meter settings, and proper disposal of meter and batteries.
Lists common error messages (Er1-Er4) and their corresponding troubleshooting actions.
Details troubleshooting steps for auto-coding errors and ambient temperature issues.
