Infopia GlucoLab - Important Information and Test Principles; Intended Use, Precautions, and Professional Consultation; Coding Accuracy and Storage Recommendations

4
5
www.infopia21.com
Dear GLUCOLAB
TM
Auto-coding Blood Glucose
Monitoring System Owner
Thank you for choosing the GLUCOLAB
TM
Auto-coding Blood Glucose
Monitoring System. This booklet has important information you need to know
about the
GLUCOLAB
TM
Auto-coding Blood Glucose Monitoring System.
Please read it carefully.
We understand that self-testing of blood glucose level provides a way to control
your diabetes and may give you peace of mind by testing regularly. As a result
GLUCOLAB
TM
Auto-coding was developed to provide you with a fast and
accurate reading with a convenient and simple process. Our goal at
GLUCO-
LAB
TM
Auto-coding is to provide the best quality healthcare products coupled
with superior customer service. Always consult with your healthcare profes-
sional before making any changes to your diabetes management. The
GLU-
COLAB
TM
Auto-coding Blood Glucose Monitoring System is for in vitro diag-
nostic use only.
Important information
The GLUCOLAB
TM
Auto-coding Blood Glucose Monitoring System is intended
for use outside the body (in vitro diagnostic use only). It should be used only for
testing blood glucose and only with fresh capillary whole blood samples. It
should not be used for the diagnosis of diabetes.
Consult your physician or diabetic healthcare professional about daily man-
agement of your diabetes and proper use of the glucometer.
Please pay close attention when handling blood. Improper procedures may
cause serious hazards to your health.
The
GLUCOLAB
TM
Auto-coding Blood Glucose Monitoring System contains
small parts. Please keep your monitoring system out of reach of children.
Test Principle
The enzyme glucose oxidase on the blood glucose test strip reads specifically
with the blood glucose. The current generated is converted and displayed as
blood glucose value.
The
GLUCOLAB
TM
Auto-coding Blood Glucose Monitoring System is plasma-
calibrated to allow easy comparison of results with laboratory methods.
A blood glucose meter which is calibrated against a whole blood method may
have different results in comparison to
GLUCOLAB
TM
Auto-coding .
The laboratory system used for calibration of the
GLUCOLAB
TM
Auto-coding
Blood Glucose Monitoring System is YSI 2300 STAT plus which is equipped
with a glucose oxidase system.
Note
< Maintaining the GLUCOLAB
TM
Auto-coding blood glucose test meter >
1. Do not assemble or disassemble the blood glucose test meter.
2. Please keep in a dry place.
3. Please keep clean and dry.
4. Please do not store in the same place as toxic chemicals or gases.
5. Keep out of direct sunlight.
CAUTION
1. If the code of the blood glucose test meter and of the blood glucose
test strip vial does not match, you must set the code number.
2. If the code on the LCD window and on the blood glucose test vial
do not match, follow the coding procedure for accurate results.