The GLUCOLAB Auto-coding
TM
Blood Glucose Monitoring System is intended
for in vitro diagnostic use only. GLUCOLAB Auto-coding
TM
Blood Glucose
Monitoring System is for self-testing.
It should not be used for the diagnosis of diabetes or for the testing of newborns.
The GLUCOLAB
TM
Auto-coding was designed to test a blood glucose (sugar)
level and can be used with a capillary whole blood sample.
Do not use the GLUCOLAB
TM
Auto-coding Blood Glucose Monitoring System for
any purpose other than blood glucose testing.
CAUTION : Before using any product, please read all instructions.
Consult your physician or diabetic healthcare professional about daily
management of your diabetes and proper use of the glucometer.
If you have any questions about the GLUCOLAB Auto-coding
TM
product, please contact Neon Diagnostics Ltd. Freephone patient
1.
Learning the System
Intended use of Blood Glucose Test Meter
GLUCOLAB
TM
Auto-coding Blood Glucose Monitoring System Kit Contents
GLUCOLAB
TM
Auto-coding Blood Glucose Test Meter
GLUCOLAB
TM
Auto-coding Blood Glucose Test Meter Display
GLUCOLAB
TM
Auto-coding Blood Glucose Test Strip Information
2. Before Testing
Setting the blood glucose test meter
Auto-Coding Function
Performing a Glucose control solution test
3. Testing Your Blood Glucose
Testing Your Blood-Preparation
Collecting a Drop of Blood
Testing Procedure
Blood Glucose Test Strip Ejector Function
4. Reviewing Your Results
5. Alternate Site Testing
6. Performing a Blood Test using and Alternate Site
7.
GLUCOLAB
TM
Auto-coding Blood Glucose Test Meter Software
8. Taking Care of Your Blood Glucose Test Meter
Cleaning Your Blood Glucose Test Meter and Maintenance
Dispose of meter and batteries
9. Troubleshooting
10. Specifications
11. Conversion table mmol/L mg/dL
12. Symbol reference
13. Warranty
6
7
www.infopia21.com
Contents
Intended use of GLUCOLAB
TM
Auto-coding Blood
Glucose Test Meter
7
8
9
10
11-12
13-14
15
16-17
18
19-21
22-24
26
27
28
29-30
31
32
33
34-37
38
39
40
41
To Next Page
Loading...
