INFOSEC E3 Pro RT - Technical Specifications; Physical and Electrical Specifications; Performance and Battery Specifications

INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 11 17 AA 59 204 18
34
TECHNICAL SPECIFICATIONS
E3 PRO
5000 RT
E3 PRO
6000 RT
E3 PRO
10k RT
Technology
On Line Double Conversion
Capacity
5000 VA/4500W
6000 VA/5400W
10k VA/9000W
Power Factor
0,9
PHYSICAL CHARACTERISTICS
Dimensions D x W x H (mm) -
UPS
UPS Unit: 530x438x88 [2U]
Battery Pack:688x438x88 [2U]
UPS Unit : 605x438x133
[3U] Battery Pack:
605x438x133 [3U]
Net Weight (kg) - UPS
UPS Unit: 15
Battery Pack: 55
UPS Unit : 18
Battery Pack : 65
INPUT
Voltage
208/220/230/240VAC
Input nominal voltage
110-300 VAC (Based on load at 50%)
176-300 VAC (Based on load at 100%)
Frequency Range
46Hz ~ 54 Hz or 56Hz ~ 64 Hz
OUTPUT
Voltage
208/220/230/240VAC
Voltage Regulation
± 1%
Frequency Range (Synchronized
Range)
46Hz ~ 54 Hz or 56Hz ~ 64 Hz
Frequency Range (Batt. Mode)
50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz
Current Crest ratio
03:01
Harmonic distorsion
 3 % THD (Linear Load)
 5 % THD (Non-linear Load)
Transfer
Time
Line mode to
Battery mode
0ms
Inverter to Bypass
0ms
Waveform
Pure Sinewave
Terminal
Yes
EFFICIENCY
AC Mode
92%
93%
Battery Mode
90%
91%
BATTERY
Battery charger
Operates when UPS connected to mains
Charging current
Adjustable from 1 to 6A
Battery type
12V9Ah
Batt specs & Number
16
20
Typical Recharge Time
9 hours recover to 90% capacity
Charging voltage
218.4 VDC ± 1%
Backup time
From 5 to 30 min. depending on the connected load
INDICATORS
LCD display
Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault
indicators
ALARMS
Battery Mode
Sounding every 4 seconds
Low Battery
Sounding every second
Overload
Sounding twice every second
Fault
Continuously sounding
MANAGEMENT / COMMUNICATION