Intégration Guide_iUC150&iUC180 40/70 Copyright © 2012 Ingenico
900009816 R11 000 01/1223 All rights reserved
1.4 PROFESSIONAL INSTALLATION REQUIREMENT
Ingenico only sells its products, to qualified partners and integrators. They are in
charge of professionally resell, integrate, and install these products inside complete
solution for end customers.
These end customers solution can be:
• Petrol station.
• Ticketing kiosk (Airline tickets, cinema, transport, etc.)
• Vending machine operator
• Parking kiosk (On / off street)
• Other
Thus, the general public cannot purchase Ingenico hardware or software.
Partners, resellers, and Integrators must have qualified electronics engineers to be
able to install or integrate our products. Furthermore, they must follow a specific
technical training conducted by Ingenico technical experts.
In addition installation must follow Ingenico recommendations, as describe in this
document, in order to respect:
• Local regulations for Electrical Safety and Radio emission levels
• Ferrite beam installation
Our field support & maintenance engineers are available for follow up and
commissioning of installation.
2 MAIN ACCESSORIES
2.1.1 Generality
For a complete description of Ingenico Accessories, please refer to iUN accessories
catalog.
2.1.2 Optional USB cable
An optional USB cable (spare part reference 296129367) with short right-angle
overmolded connectors can be purchased as an accessory. This cable is designed to
optimize the required volume for iUC180 & iUC150 installation in the kiosk
and allows
the use of the cable sleeve.
To Next Page
Loading...
