Intégration Guide_iUC150&iUC180 53/70 Copyright © 2012 Ingenico
900009816 R11 000 01/1223 All rights reserved
3.1.6 Development station (iUC180)
Introduction
With this development station, it is possible to develop application software for the
entire range of iUN products.
The software is written in high level C language in a multi-application environment.
Ingenico provides the complete set of software and the equipment required for
development. This also includes the documentations. Training sessions can also be
proposed.
Required Configuration
The development station executes on a Pentium PC running under Windows
2000/XP/Vista/Seven.
Development tools for ARM such as a cross-compiler are required. These comprise:
• A C compiler (GNU), an assembler and a link editor for ARM and Thumb,
• A development environment,
• A remote debugger.
Supply
The SDK 30 development station comprises:
• The user license for the M²OS software which includes:
o The operating system,
o The application manager,
o The libraries
o The associated documentation in PDF format
• The user license for the Software Authentication Tool (SAT) software,
• The user license for the Local Loading Tool (LLT),
• The card reader and the RSA cards used to sign the applications.
SDK + Add On Unattended
For iUC180: minimum configuration SDK 9.2 and Add-On Unattended 3.1 are
required
Associated services
• Training
Development of applications on iUN
Duration: 1 day
Location: R&D center.
• Pre-requisites for training:
A good understanding of the C language is required. Familiarity with firmware can
be useful.
To Next Page
Loading...
