Ingenico iUC180 - Page 52

Intégration Guide_iUC150&iUC180 52/70 Copyright © 2012 Ingenico
900009816 R11 000 01/1223 All rights reserved
Downloading Starting
The downloading can be requested:
• Using the application manager on maintainer request. This is the case, in
particular, where a program upgrade is concerned or when a new software is
added in the terminal memory. In this case, the procedure is simplified to the
utmost.
The user triggers the call from the application manager by choosing the upgrade
function in the menus and using the dialogue keys. Connection to the server takes
place automatically.
For an upgrade, the user has nothing to enter.
To request a new software, the user is guided on the screen in making his choice.
The identity of the business is not requested. The identity stored in the system unit is
automatically transmitted to the server.
• Using the application software on request by the center or merchant (Example:
in France, by « envelopes").
In this case, downloading takes place entirely automatically. The downloading
ticket informs the merchant.
Local loading procedure on:
iUC180 iUC150
Trigger the LLT software on the PC
Switch off the product
Connect the PC to the COM or slave USB
connector.
Insert the LLT cable in the COM port of the
iUC150.
Press the rear button and switch on the
iUC180.
Connect the PC to the slave USB
connector.
When the LED near the button becomes fix
red, release the button. “LLT” text is now
displayed on screen.
Wait 3 seconds.
Trigger the LLT and follow the instructions given in the « LLT User’s guide v4 » to load the
software.
The parameter definition files must be placed in the "HOST" directory.