7.2 SENDING TRANSACTIONS MANUALLY
The terminal is in the standby mode.
Press the leftmost button on the key bar
From the menu select «Siųsti» (to navigate through the menu use ▼ ▲ key bar keys or
central keys on the key bar) and then press the green key (ENTER) to confirm.
Operacijos
1-Siųsti
2-Anuliuoti
3-Kortelės operac
4-Rankin įvedimas
If you wish to send transactions, press <TAIP> or press the green key (ENTER).
Operacijos
Siųsti operac.?
Ar esate tikri?
Ne Taip
The terminal shall dial the control center’s number.
Prisijungimas...
Prašome palaukti
The terminal sends transactions
At the end of the communication session the terminal shall issue the report that demonstrates the number of transactions and
the total sum.
8. REPLACEMENT OF THE PAPER ROLL
If a red line appears on receipts, the paper roll shall be replaced. Use only special thermal paper for the terminal.
1.-2. Open the paper roll cover
3. Place a new roll in place
4. Close the cover, tear off any excess paper
To Previous Page
Loading...
