Ingenico iWL252 - Page 31

SKYZER TECHNOLOGIES PAGE 31 OF 132
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE Version 1.00
8.0
USE DNS Y/N
1-YES 2-NO
Press the corresponding number key and press ENTER to set for DNS or IP
Option 1 – to allow the terminal to use Paymark DNS address. Option 1 is
selected by default.
9.0
IP Primary
HOST DNS
direct.paymark.co.nz
This parameter specifies the Paymark Primary DNS address. By default, it is set to
direct.paymark.co.nz. Press ENTER
10.0
IP Secondary
Host DNS
direct2.paymark.co.n
This parameter specifies the Paymark Secondary DNS address. By default, it is set to
direct2.paymark.co.nz. Press ENTER
11.0
USE DNS Y/N
2-NO
Option 2 – to allow the terminal to use Paymark IP address.
12.0
IP Primary
HOST IP ADDRESS
117.120.34.110
This parameter specifies the Primary Host IP Address. By default, it is set to
117.120.34.110. Press ENTER.
13.0
IP Secondary
HOST IP ADDRESS
117.120.32.110
This parameter specifies the Secondary Host IP Address. By default, it is set to
117.120.32.110. Press ENTER.
14.0
SAVE CONFIG Y/N
Terminal prompts to save configuration. Press ENTER to save configuration on the
terminal or CLEAR to exit and return to idle screen.
15.0
START TCP-IP Y/N
Terminal prompts to start TCP-IP link. Press ENTER to start the link or CLEAR to
exit without starting.