To Next PageTo Next Page
Need help?Do you have a question about the Ingersoll-Rand EP 7.5 and is the answer not in the manual?
General| Power | 7.5 hp |
|---|---|
| Horsepower | 7.5 HP |
| Max Pressure | 175 PSI |
| Tank Size | 80 gallons |
| Belt Guard | Yes |
| Phase | Three |
| Pump Type | Two Stage |
| Voltage | 200-230/460 V |
General guidelines for safe installation, operation, and maintenance.
Essential safety measures before compressor installation or maintenance.
Procedure to check the high discharge air temperature shutdown function.
Warnings regarding piping materials and system compatibility for air compressors.
Disclaimer on compressor suitability for breathing air applications.
Warnings for electrical hazards, lifting, belts, and fan blades shown on decals.
Warnings for coolant, rotation, air discharge, and filter replacement shown on decals.
Decals warning about hot surfaces, installation clearance, and lift points.
Specific considerations for installing compressors in outdoor environments.
Essential guidelines for air system piping to ensure safe and efficient operation.
Steps and considerations for safely installing the electrical system of the compressor.
Procedure for converting voltage for the compressor, requiring a qualified electrician.
Procedure to verify correct motor rotation to prevent airend damage.
Instructions for safe pre-start checks, starting, and stopping procedures.
Description of the coolant system, its functions, and components.
Components and flow of the air system, including filter, airend, and aftercooler.
Recommended maintenance tasks and intervals for optimal compressor condition.
List of common compressor troubles, their causes, and relevant checkpoint numbers.
Detailed breakdown of the main components of the compressor unit.
Listing of parts related to the drive system, including sheaves and belts.
A template for recording all maintenance performed on the compressor unit.
