Operating & Maintenance Manual Safety
38 22442594
Safety
WARNING
!
Warnings call attention to instructions which must be followed precisely
to avoid injury or death.
CAUTION
!
Cautions call attention to instructions which must be followed precisely
to avoid damaging the product, process or its surroundings.
NOTE: Notes are used for supplementary information.
General Information
Never operate unit without first observing all safety warnings and carefully reading the
operation and maintenance manual shipped from the factory with this machine.
Ensure that the operator reads and understands the decals and consults the manuals before
maintenance or operation.
Ensure that the Operation and Maintenance manual, and the manual holder, are not removed
permanently from the machine.
Ensure that maintenance personnel are adequately trained, competent and have read the
Maintenance Manuals.
Make sure that all protective covers are in place and that the canopy / doors are closed during
operation.
The specification of this machine is such that the machine is not suitable for use in flammable
gas risk areas. If such an application is required then all local regulations, codes of practice
and site rules must be observed. To ensure that the machine can operate in a safe and reliable
manner, additional equipment such as gas detection, exhaust spark arrestors, and intake
(shut-off) valves may be required, dependant on local regulations or the degree of risk
involved.
A weekly visual check must be made on all fasteners / fixing screws securing mechanical
parts. In particular, safety-related parts such as coupling hitch, drawbar components, road-
wheels, and lifting bail should be checked for total security.
All components which are loose, damaged or unserviceable, must be rectified without delay.
Air discharged from this machine may contain carbon monoxide or other contaminants which
will cause serious injury or death. Do not breathe this air.
To Next Page
Loading...
Need help?
General
