− The Wi-Fi 5G AP is enabled.
The SSID starts with VG814-5G-
, followed by six digits.
− WPA2-PSK is used for
authentication.
− The password contains the
last eight digits of the SN.
Default settings of
Ethernet
− Four LAN ports are enabled.
− The IP address is
192.168.2.1.
− The subnet mask is
255.255.255.0.
− The DHCP server is enabled.
The IP address pool is
192.168.2.2–192.168.2.100, and
IP addresses can be
automatically allocated to
downstream devices.
Network access control for
the gateway
− HTTP and HTTPS are enabled,
with the port numbers of 80
and 443 respectively.
− Telnet is disabled.
− SSH is disabled.
− Access from the cellular
network is allowed only over