InHand VG814 - Default Settings

3 Default Settings
No.
Function
Default Settings
1
Dialup over the cellular
network
− Enabled (The Cellular
indicator is steady green
after dialup succeeds.)
By default, the dual-SIM
function is disabled, and SIM1
is enabled.
2
Satellite positioning and
inertial navigation service
− Enabled (The GNSS indicator
is steady green after
positioning succeeds.)
− The inertial navigation
function is enabled.
3
On-board diagnostics (OBD)
− Enabled
− The CANbus baud rate is
automatically detected.
− The OBD protocol is
automatically detected.
− OBD data is automatically
scanned.
4
Default settings of Wi-Fi
− The Wi-Fi 2.4G AP is
enabled. The SSID starts with
VG814-, followed by six
digits.