5.8.2 New IPsec Tunnel
A dedicated virtual tunnel is established between the gateway and other devices or
cloud platforms on the network.
Method for establishing an IPsec tunnel for the gateway:
Click "Wizards >> New IPsec Tunnel", set "Map Interface" to an interface
("bridge": bridge interface; "cellular": dialup interface; "dot11radio": Wi-Fi
interface) for which you want to establish a tunnel, enter the peer IP address for
"Destination Address", and enter the subnet IP addresses and masks at both ends of
the tunnel. In Phase 1, enter the IDs at both ends of the tunnel and the
connection key, and click Apply & Save.
To Next Page
Loading...