5.7.2 Track
Currently, linkage is enabled between the track module and the following
application modules: VRRP, static routing, and interface backup. If detection
succeeds, the corresponding track entry is in the Positive state. If detection
fails, the corresponding track entry is in the Negative state.
Method for adding a track entry for VG814:
Click "Link Backup >> Track >> Track", set "Index" as required, select "sla",
"interface", or "vrrp" for "Type", set "SLA/VRRP ID" based on the ID in the SLA
list, set "Negative Delay (s)" and "Positive Delay (s)" as required, click Add,
and then click Apply & Save.
Negative Delay (s): In case of an abnormal state, switching can be delayed based
on the delay setting (0 indicates immediate switching).
Positive Delay (s): When a failure is recovered, switching can be delayed based on
the delay setting (0 indicates immediate switching).
Method for adding an IPsec track entry for VG814:
To Next Page
Loading...