InHand VG814 - Page 44

establishing the
IPsec service
establishing the
IPsec service
IKE version
IKE version used
IKE version
Same as that of
gateway A
Authentication
method
Shared key
Authentication
method
Local subnet
IP address of the
subnet of gateway
A
Local subnet
IP address of the
subnet of gateway
B
Peer subnet
IP address of the
subnet of gateway
B
Peer subnet
IP address of the
subnet of gateway
A
Detailed configuration steps:
1. Configure gateway A and gateway B.
(1) Add IKE and IPsec policies, and click Apply & Save.
(2) Add IPsec tunnels and click Apply & Save.