2. Configure the pseudowire class: Enter a name of any pseudowire class. "L2TP
Class" is the same as that on the "L2TP Class" page. Set "Source Interface" to the
interface connecting to the server. Select L2TPV2 for "Protocol" and click Add.
3. Set L2TPV2 tunnel parameters: Enter the server's domain name or IP address for
"L2TP Server". "Pseudowire Class" is the same as that on the "Pseudowire Class"
page. Enter the user name and password created on the server. Set other parameters
as required. Click Apply & Save.
To Next Page
Loading...