"VPN >> Certificate Management", and
import the CA certificate, public key,
and private key for authentication.
Digital certificate/TLS authentication
Enter the pre-shared key created on the
OpenVPN server, click "VPN >>
Certificate Management", and import the
CA certificate, public key, and private
key for authentication.
Digital certificate/TLS
authentication/user name/password
Enter the pre-shared key, user name,
and password created on the OpenVPN
server, click "VPN >> Certificate
Management", and import the CA
certificate, public key, and private
key for authentication.
Method for settings when the gateway is connected to the OpenVPN server as a
client:
OpenVPN can be configured manually, or OpenVPN configurations can be imported. In
the following example, the authentication type is a digital certificate.
1. Set the OpenVPN parameters for the gateway as shown in the figure below,
ensuring that the network parameters at both ends of the tunnel are consistent.
Click Apply & Save.
To Next Page
Loading...