If a common domain name server other than the Custom service is used, set "Method
Name" and "Service Type" as required, enter the user name, password, and host name
obtained from the server, and click Add.
If "Disable" is selected, the DDNS service is not used.
2. Select the gateway interface, enter the name of the DDNS update method, click
Add, and then click Apply & Save to apply the DDNS update method to the gateway
interface.
3. Wait several minutes after the DDNS settings are applied and saved. Then ping
the host name (domain name) of the domain name server to confirm the successful
application of the DDNS service.
To Next Page
Loading...