5.6.2.3 BGP
Method for enabling dynamic routing between VG814_A and VG814_B over BGP in the
scenario:
1. Configure VG814_A. Click "Routing >> Dynamic Routing >> BGP", check "Enable",
and set "AS number" as required.
2. In the "Neighbor" bar, click Add, enter the IP address 192.168.1.2 of VG814_B,
set "AS number" as required, and click Apply & Save.
3. Enter a valid IP address for "Router ID", configure VG814_A in the "Network"
bar, and click Add, to announce the routing entry of VG814_A. Then click Apply &
Save.
To Next Page
Loading...