InHand VG814 - Page 79

Click "Link Backup >> VRRP", set "Virtual Route ID" as required, select the
gateway interface of VG814_A, enter the virtual IP address, set the interface
priority to 110, and click Add.
In the navigation tree, click "Link Backup >> VRRP >> Status" and view the VRRP
status.
2. Configure VG814_B.
Click "Link Backup >> VRRP", set the interface priority to 100, and click Add.
In the navigation tree, click "Link Backup >> VRRP >> Status" and view the VRRP
status.