InMode BodyTite - Front Panel and Operator Control Panel; Software Screens

BodyTite Operator Manual
Section 4: Device Description
15 of 30
4.2 Front Panel and Operator Control Panel
The Operator Control Panel is located on the upper side of the System. The Operator
Control Panel consists of an LCD screen with touch panel.
On the front panel there is a black On/Off switch on the left, and handpiece connector
on the right.
Power On-Off
switch
▪ Power switch turns power electronics On and Off.
LCD Screen
▪ LCD Screen shows information about system mode and
treatment parameters.
▪ The panel allows changing treatment parameters and
system mode.
Power electronics is not activated if the Handpiece is not connected to its connector on
the front panel.
4.3 Software Screens
The Splash Screen appears after the On-Off switch is turned on.
Figure 4-2: 2 Splash Screen
*The Software version number is displayed on the top of the screen and depends on the
product version.