Chrysler/Jeep OBD1 Systems
VEHICLES COVERED / PANEL INDICATOR LIGHTS /DLC
CanOBD2&1 69
VEHICLES COVERED
This section covers Chrysler fuel injected vehicles from 1983-1995.
Type
Model
Year
Model
Passenger
Cars
1983-1995 Chrysler, Dodge and Plymouth Fuel
Injected Models Only (Excluding
Laser/Talon 1.8L, 2.0L (ALL YEARS), 1990
Monaco/Premier, 1993-1995 Intrepid, LHS,
Concorde and Vision, 1995 Avenger,
Stealth (ALL YEARS) and Cirrus 2.5L (ALL
YEARS))
1987-1995 Chrysler, Dodge and Plymouth Fuel
Injected Models Only
Light Truck
and Vans
1992-1995 Diesel Models
Jeep 1993-1995 Jeep Fuel Injected Models Only
INSTRUMENT PANEL INDICATOR LIGHTS
Your vehicle’s instrument panel has either a “Power Loss”, “Check
Engine” or “Malfunction Indicator Lamp”, depending on the year of the
vehicle. These lights are designed to warn you of component
malfunctions.
POWER
LOSS
CHECK
ENGINE
MALFUNCTION
INDICATOR
LAMP
If your instrument panel indicator lights do not come on when
you turn on the ignition, please refer to your vehicle’s service
manual. You may have problems in the car’s circuitry. It is
recommended that you fix these problems before retrieving
DTC’s from your vehicle’s computer.
DATA LINK CONNECTOR (DLC)
Chrysler vehicles are equipped with special
test connectors that make it possible to
connect specialized testing equipment that
communicates with the vehicle’s on-board
computer. Chrysler’s vehicle test connectors
are usually dark in color (BLACK or GREY)
and are located under the hood.
To Next Page
