EasyManua.ls Logo

Innovative Technology NV200 Spectral - User Manual

Innovative Technology NV200 Spectral
77 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Doc: User Manual NV200 Spectral
Version: 1.0

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Innovative Technology NV200 Spectral and is the answer not in the manual?

Summary

Document Introduction

Related Documents

Lists other documents relevant to the NV200 Spectral, including protocol specifications and guides.

Manual Amendments

Details the revision history of the manual, including version, date, and amendments.

Copyright

States the copyright ownership and reproduction restrictions for the manual.

Limited Warranty

Outlines the warranty terms and conditions for Innovative Technology Ltd. hardware products.

Product Safety Information

Highlights important safety points and warnings for using the product.

Disclaimer

Disclaims responsibility for loss or damage caused by product installation and use.

Product Introduction

General Description

Provides an overview of the NV200 Spectral banknote validator and its capabilities.

Key Features

Lists the main features and benefits of the NV200 Spectral validator.

Typical Applications

Describes common scenarios and industries where the NV200 Spectral is used.

Component Overview

Illustrates and names the different components and modules of the NV200 Spectral.

Bezel Options

Lists available bezel part numbers and their descriptions for the NV200 Spectral.

Cashbox Options

Lists available cashbox part numbers and their descriptions.

Module Options

Lists available module part numbers and their descriptions.

Consumables

Lists part numbers and descriptions for consumables like bags and tickets.

Technical Data

Dimensions

Provides the physical dimensions of the NV200 Spectral with different cashbox options.

Weight

Details the weight of the NV200 Spectral unit and its various cashbox and module configurations.

Environmental Requirements

Specifies the operating temperature and humidity ranges for the NV200 Spectral.

Power Requirements

Details the power requirements for the NV200 Spectral, including voltages and currents.

Supply Voltages

Details the required supply voltages and ripple voltage for the NV200 Spectral.

Supply Currents

Lists the current draw of the NV200 Spectral and its modules during different operation phases.

Power Supply Guidance

Provides guidance on selecting suitable power supplies for the NV200 Spectral and its peripherals.

Interface Logic Levels

Defines the logic levels for inputs and outputs of the NV200 Spectral.

Opto-Isolated Inputs

Explains the support for opto-isolated communication and its connection requirements.

Reliability Data

Outlines Mean Cycles Between Failure (MCBF) and Interruption (MCBI) for the NV200 Spectral.

Media Requirements

Specifies the dimensions and paper requirements for media accepted by the NV200 Spectral and its modules.

Mechanical Installation

Compatibility

Details hardware compatibility with previous ITL products and potential issues.

Hardware Compatibility

Discusses compatibility with older ITL products and the need for specific bezels/cashboxes.

Software Compatibility

Discusses software compatibility, including interface protocols and re-programming.

Interface Protocols

Discusses potential timing issues with interface protocols when replacing older models.

Re-programming

Advises using the latest Validator Manager for re-programming and potential issues with older versions.

Bezel Mounting

Provides step-by-step instructions and diagrams for fitting the bezel to the NV200 Spectral.

Bezel Fitting

Provides step-by-step instructions and diagrams for fitting the bezel to the NV200 Spectral.

Cashbox Removal & Opening

Details how to remove and open the cashbox from the NV200 Spectral unit.

TEBS Cash Bag Removal & Replacement

Explains the process of removing and replacing the cash bag in the TEBS cashbox, noting its software/hardware lock.

Lock Mounting

Provides instructions and diagrams for mounting locks to the NV200 Spectral and its cashboxes.

Lock Fitting

Details the steps for fitting a lock to the NV200 Spectral, including component removal.

Lock fitting - Standard Cashbox

Instructions for fitting locks to the standard NV200 Spectral cashbox for security.

Lock Fitting - TEBS Cashbox

Notes that the TEBS cashbox comes with a factory-installed lock (PA02540).

Lock Specifications

Information on available locks for the NV200 Spectral and a link to keyless lock assembly.

Lock Cam

Details the part numbers for the Lock Cam needed for full locking capability.

Docking Plate Mounting

Instructions for mounting the docking plate, noting the need for a different cable.

Loading paper into the Smart Ticket

Instructions for loading paper into the SMART Ticket module.

Roll

How to mount the roll paper in the printer, ensuring the correct orientation.

Top

Details the orientation of roll paper for insertion into the printer.

Machine Mounting

Discusses various mounting methods for the NV200 Spectral and dimension changes with different cashboxes.

Machine Mounting - Standard Cashbox

Provides dimensional diagrams for mounting the NV200 Spectral with a standard cashbox.

Machine Mounting - TEBS

Provides dimensional diagrams for mounting the NV200 Spectral with a TEBS cashbox.

Earth Bonding

Explains the importance of earth bonding for the NV200 Spectral chassis and mounting points.

Screw Specifications

Table listing screw thread types and lengths for bezel and cashbox mounting.

Things to consider

Lists important considerations for mounting the NV200 Spectral, including smart tickets, weight, and accessibility.

Software Installation and Configuration

Introduction

Introduces the section on updating datasets and firmware for the NV200 Spectral.

Software Downloads

Explains how to download software from the Innovative Technology Ltd. website.

Drivers

Details the ITL drivers required for connecting validators to Windows devices.

Dataset;Firmware Programming

Provides information on programming the NV200 Spectral with datasets and firmware.

Validator Manager

Introduces Validator Manager, a utility for reprogramming ITL validators, hoppers, and recyclers.

General Description

Describes Validator Manager's function and requirements for detecting the device.

System Requirements

Lists the system requirements for installing and running Validator Manager.

Hardware Setup

Shows a diagram for direct USB connection for programming/testing the NV200 Spectral.

Switching to Programming Mode (SSP)

Explains how to switch the NV200 Spectral to programming mode (SSP interface).

Programming the device

Steps to program the device using Validator Manager after switching to SSP mode.

SD Card

Explains reprogramming the NV200 Spectral using an SD card slot.

General Description

Explains reprogramming the NV200 Spectral using an SD card slot.

Hardware Requirements

Lists the hardware requirements for the SD card, including size and class.

Re-programming via SD Card

Step-by-step guide to setting up an SD card and performing updates on the NV200 Spectral.

Remote Updates

Describes updating the unit via an SSP command for firmware downloads.

General Description

Describes updating the unit via an SSP command for firmware downloads.

Protocols and Interfacing

Introduction

Introduces the supported industry protocols for the NV200 Spectral.

Interface Connectors

Identifies the two connectors on the validator for interfacing and programming.

User Interfaces

Describes the user interfaces, including DIP switches and buttons on the NV200 Spectral and its modules.

Dip Switches on the NV200 Spectral

Details the DIP switch bank on the NV200 Spectral and its various options and default settings.

Dip Switches on the Payout module

Describes the DIP switch bank on the SMART Payout unit and its options.

Smart Ticket Button

Explains the function of the SMART Ticket button and its use for printing test tickets.

Smart Ticket Dip Switches

Describes the 4 DIP switches found on the SMART Ticket module for configuration.

SSP and eSSP

Explains the Smiley® Secure Protocol (SSP) and Encrypted SSP (eSSP) for secure cash handling.

General Description

Introduces Smiley® Secure Protocol (SSP) and Encrypted SSP (eSSP) for secure cash handling.

Pin Assignments

Details the pin assignments for the SSP interface connector on the NV200 Spectral.

Setup Examples

Provides examples of setting up connections for the NV200 Spectral.

NV200 Spectral

Provides a drawing and part list for connecting the NV200 Spectral via USB.

NV200 Spectral and Smart Coin System

Shows how to connect the NV200 Spectral with a Smart Coin System, including power requirements.

ccTalk

Explains the ccTalk serial communications protocol and its compatibility with NV200 Spectral.

General Description

Explains the ccTalk serial communications protocol and its compatibility with NV200 Spectral.

Pin Assignments

Details the pin assignments for the ccTalk interface connector on the NV200 Spectral.

ccTalk DES Encryption

Explains DES encryption for ccTalk and the process of exchanging secret keys in Trusted Mode.

Setup Example Drawings

Provides drawings illustrating setup examples for ccTalk connections.

NV200 Spectral

Drawing showing NV200 Spectral connection to a ccTalk host machine.

NV200 Spectral with Payout Module (SPO)

Drawing showing SPO connection to a ccTalk host machine.

Routine Maintenance

Introduction

Introduces the section on routine maintenance and the low maintenance design of the NV200 Spectral.

Recommended Cleaning Intervals

Recommends cleaning optical lenses monthly or as needed to maintain performance.

Cleaning the NV200 Spectral

Emphasizes disconnecting power before cleaning to prevent damage.

Cleaning the Validator

Provides instructions on cleaning the NV200 Spectral validator, warning against solvent cleaners.

Cleaning the TEBS Cashbox

Instructions for cleaning the TEBS cashbox after removing it and the head.

Cleaning the Ticket Module

Steps to clean the SMART Ticket module by opening the printer and accessing the ticket path.

First Level Support

Bezel;Status LED Flash Codes

Explains the flash codes displayed on the NV200 Spectral bezel for error indication.

Second Level Support

Obtaining Logs using SD Card

Instructions on using an SD card to retrieve event and performance logs from the NV200 Spectral.

Clearing a Jam from the NV200 Spectral

Provides steps for clearing various types of note jams within the NV200 Spectral.

Note is in the note path

Steps to clear a note jam by lifting the lid and carefully pulling the note out.

Note is visible once the NV200 Spectral has been removed

How to clear jams when the note is visible after removing the NV200 Spectral head.

Note isnt visible once the NV200 Spectral has been removed

Steps to clear a jam when the note is not visible, accessing the cashbox.

Clearing a Jam from the TEBS Cashbox

Instructions for clearing jams within the TEBS cashbox, including accessing the stacker plate.

Clearing a Jam from the Payout Module

Steps to clear jams from the payout module, requiring removal and an Allen key.

Diverter and Tape positions in the Payout Module

Illustrates the barcode tape position with the diverter in open and closed states.

Clearing a Jam from the Ticket Module

Steps to clear jams from the SMART Ticket module after removing it.

Testing after an error has been cleared

Recommends testing the device with bills and notes/tickets after clearing an error.

Complainces and Approvals

EC Declaration of Conformity

States compliance with EC Declaration of Conformity (CE Marking) and RoHS.

FCC Approval

Details FCC compliance for Class B digital devices and measures for interference.

Central Bank Approvals

Lists central bank approvals like ECB, BoE, and CBR, with links for more info.

Appendix

Cable Drawings

Introduces cable drawings available from ITL technical support.

CN00214

Provides the drawing and parts list for the CN00214 USB A to USB B Cable Assembly.

CN00292

Shows the drawing and connectivity details for the IF10 - SSP to Binary Interface Cable.

CN00414

Provides the drawing and connectivity details for the RS232 to Validator Cable Assembly.

CN00487

Shows the drawing and connectivity details for the Smart Ticket to Host assembly cable.

Lock Specification

Displays detailed specifications and dimensions for the NV200/NV200 Spectral cashbox lock.

Keyless Locking Cam

Illustrates the components and assembly of the keyless locking cam.

TEBS Locking Cam

Shows detailed specifications and dimensions for the TEBS locking cam.

Connector Specifications

Lists connector types, vendors, part numbers, pins, pitch, and polarising features.

Switching to Programming Mode (SSP)

Steps to switch the unit to programming mode by toggling dip-switch 8.

Free Fall Cashbox Advice

Information on the cashbox and TEBS bag's design for impact resistance.

ccTalk DES Encryption - Trusted Mode

Steps to configure and pair the NV200 Spectral with a DES trusted machine.

Escrow

Explains the single note escrow facility and its operation for holding validated notes.

Escrow Control

Details the sequence of operation for the single note escrow facility.

File Naming Convention

Explains the structure and meaning of dataset and firmware file names for the NV200 Spectral.

Innovative Technology NV200 Spectral Specifications

General IconGeneral
BrandInnovative Technology
ModelNV200 Spectral
CategoryBank Note Validator
LanguageEnglish

Related product manuals