Need help?Do you have a question about the Innovative Technology NV9 Spectral and is the answer not in the manual?
Essential safety precautions for operating and maintaining the NV9 Spectral.
Detailed power supply specifications including voltage and current.
Nominal and acceptable voltage ranges for the NV9 Spectral power supply.
Current draw specifications for the validator during different operations.
Recommendations for selecting a suitable power supply for the NV9 Spectral.
Procedures for cleaning the validator and its components.
Guidelines on how often to clean the NV9 Spectral validator.
Step-by-step instructions for cleaning the NV9 Spectral validator.
How to clean the outer housing of the NV9 Spectral validator.
Process for removing and cleaning the lozenge mechanism.
Steps to remove the locking clip for lozenge access.
How to detach the lozenge assembly from the main housing.
Instructions for correctly refitting the lozenge assembly.
Procedures for updating datasets and firmware on the validator.
Using the Validator Manager software for device programming.
How to set the NV9 Spectral to SSP programming mode.
Steps to program or update the NV9 Spectral device.
General| Operating Voltage | 12VDC ±10% |
|---|---|
| Power Supply | 12VDC |
| Operating Temperature | 0°C |
| Protocols | SSP, MDB |
| Acceptance Speed | 2 seconds per note |
| Communication Interface | USB, RS232 |
| Compatibility | Multi-currency |
To Next Page